LEFT MENU

High Power Zigbee Serial RS232 Adapter for IOT, WSN applications

Model No.
ZA-H
Made in
Taiwan
Request for Quotation
   

Key Features

3 in 1 High Power Zigbee module

(I/O switch: Coordinator, Router and endDevice)

TI CC2530 + CC2591 Solution, Support Mesh Network

SupportHigh Power, Long range, Serial Port, Digital I/O, ADC

Features:

1. 3 in1 firmware: Coordinator, Router and end Device

2. TI CC2530 + 2591, High power mode

3. Support Serial Port,Digital I/O and Analog Input interfaces:

4  DigitalI/O:

Remote control logic high (MIN 2.4V), low (MAX0.5V).

Output drives capability 20mA. , Max Voltage3.3V.

5. Analog Input(ADC): Max Voltage 3.3V, 8bit-resolution

 

Applications:

1. Homeautomation, building automation

2. Cablereplacement

3. SCADAsystem, Wireless sensor network, Internet of Things

4. Robot,unmanned carrier

5. PDA, POS,receipt printer, bar code reader, RFID, card reader

6. Powermeter, Smart energy, Green power, LED light

7. Wireless Sensor Network (WSN)

8. Internet of Things (IOT)

 

Specifications:

1. Solution: TI CC 2530 + CC2591 (High power)

2. Coverage: 300~500 m (High power) (The actual distanceis depend on the real

environment and the antenna.For reference only)

3. Tx. Power: 18 dBm (Highpower)

4. Rx. Sensitivity (Nominal):-95 dBm (High power)

5. Baud Rate: Supports1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps

6. Connection: Point toMulti-points

7. UART Interface: TxD, RxD,GND, CTS/RTS

8. RS-232 Interface: D_SUB9-pin female

9. Standard: 2.4 GHz IEEE802.15.4 / ZigBee Pro Stack

10. Data rate: 250Kbps

11. Data Bit: 8 bit

12. Frequency: 2.4GHz~2.5 GHz

13. Modulation: DSSS

14. Antenna: RF-Out, U.FLconnector

15. Power Supply: +3.3 VDC

16. RF characters:

Receiver Sensitivity: -95 dBm

Frequency Error Tolerance:-50~+50 KHz

Output Power (High Power): +18dBm

EVM: 30 %

17. Operation Temperature: -20°C to +75°C

18. Dimensions: 25 x 17.5 mm

Remark: All contents aresubject to change without notice.

 

Mesh Network:

Max. 20 nodes @ 1st levelunder the coordinator, Max. 4 routers in the 20 nodes

Max. 20 nodes @ 2nd levelunder each router @ level 1, Max. 4 routers in the 20 nodes

Max. 20 nodes @ 3rd levelunder each router @ level 2, Max. 4 routers in the 20 nodes

Max. 20 nodes @ 4th levelunder each router @ level 3, Max. 4 routers in the 20 nodes

Max. 20 end devices @ 5thlevel under each router @ level 4

Max. 4 hoppings between thecoordinator to the end device

Payment Details

  • Minimum Order:2
Other Products
Loading ...Shipping & Packaging
Loading ...Payment Terms
Loading ...Returns & Refunds