Bluetooth BLE Beacon RS232 Reader, iBeacon, Altbeacon, Eddystone,TPMS

Model No.
Made in
Request for Quotation

Key Features

Bluetooth BLE Beacon RS-232 Reader

Model: BLE-232R
Tag type for the iBeacon, Eddystone, AltBeacon, Uconnect beacon format
The reader will read the BLE beacon tag and report the
packet via RS-232 interface. The reader will filter the iBeacon,
Eddystone, Altbeacon or Uconnect Tag. The DIP switch will
select the type of reader. The packet include the reader ID
which will identify the position information.

1. Uconnect Active RFID for RTLS applications
2. iBeacon, Eddystone, Altbeacon beacon filter
3. The packet information include the reader ID, Beacon ID
and RSSI value

1. COM port: 9,600 bps,8 data bits,One stopbit,None parity,w/o flow control
2. Range: 50 m ,in open space for reference only
3. Bluetooth BLE V4.x
4. RS-232 Interface: D_SUB 9-pin female
5. Frequency: 2.400 to 2.4835 GHz
6. Tx. Power: Max. 3 dBm
7. Rx. Sensitivity: -89 dBm typical
8. Power Supply: 5~27VDC, 1A Max
9. Current Consumption: up to 30 mAh
10. Operation Temperature: –40 °C to +85 °C
11. Dimensions: 81.6 mm (L) x 31.75 mm (W) x 17 mm (H)
12. Antenna Gain: Chip antenna max. 2 dB

BLE Beacon filter: iBeacon, Eddystone, AltBeacon, Uconnect
All DIP switch is “0” by default.
Tag type is "1": Uconnect Tag
Tag type is "2": iBeacon
Tag type is "3": Eddystone
Tag type is "4": Altbeacon


DIP No. 1 is set to “1” (On): Raw packet data
Prefix: “$”
Raw packet data is between “$” and “CR”
Suffix: Carriage Return

Default: All pin is “0”, Baud rate 9,600 bps., 8 Data bits, None parity, 1 Stop bit.

DIP No. 9 is set to “1” (On): The baud rate is 115,200 bps, 

Payment Details

  • Payment Terms:PayPal ,Alipay
  • Minimum Order:1 Piece(s)


  • Bluetooth BLE Beacon Scanner

Other Products

You may also like

Loading ...Shipping & Packaging
Loading ...Payment Terms
Loading ...Return Policy